# Piggy Bank Initial with Name

[![ThisLittleBrick](https://cuttle-uploads.imgix.net/103143/505f002eef539b746eb6a874e70d0f80b89b11388bc103c81165afc079240afe.jpg?auto=compress,format&q=80&fit=crop&width=32&height=32&dpr=1)Tara](https://cuttle.xyz/@ThisLittleBrick)

Feb 16 (updated Feb 20)

Public

![](https://cuttle-uploads.imgix.net/103143/7c12a355480d2b37eda603e3a62adb17b0cda3f11f39e36e46eccfce5d876d4e.jpg?auto=compress,format&q=80&fit=max&width=700&height=1280&dpr=1)

Create this piggy bank by updating the initial and name. You can adjust the position and size of the name as well.

You have the option of cutting this with or without a base.

-   If you select **no** **base**, it automatically makes it an 8 layer sign (excluding the name). I do not recommend going any thinner than this as it may not stand on its own very well. On the contrary, you can absolutely increase the number of middle layers to make it a thicker piggy bank to fit more $.
    
-   If you select **cut with a base**, it automatically makes it a 7 layer sign (excluding the name) you can further decrease it to 6 layers by changing _number of middle layers_ to 2. However I would not go any less than that, because then you will not be able to fit much change in it.
    

These suggestions are all based on using 0.2" material. If cutting with thicker or thinner material, adjust accordingly. If cutting with a base, the slot is offset backwards on the base so that the piggybank remains centered on the base when assembled.

You also have the option to cut a small circle on the backer for use with a piggy bank plug. (I.E. [https://amzn.to/4rhpU2B](https://amzn.to/4rhpU2B) ) Adjust hole size according to the plug your purchase, however do not go larger than 1.5" diameter circle.

Materials used: _(may contain affiliate links)_

-   [Bubblegum Pink](https://houstonacrylic.com/r?id=56geu9)
    
-   [Clear](https://houstonacrylic.com/r?id=eibsb1)
    
-   [plywood](https://www.homedepot.com/p/Columbia-Forest-Products-1-4-in-x-2-ft-x-4-ft-PureBond-Maple-Plywood-Project-Panel-Free-Custom-Cut-Available-1789/203552993?MERCH=REC-_-fbt_test-_-312284408-_-2-_-n/a-_-n/a-_-n/a-_-n/a-_-n/a)
    

See Kerf Tester below if using the base.

![](https://cuttle-uploads.imgix.net/103143/17ce100da8cdf4adaa5c829d2c1a74836cfac55f3b44a12bc67c2d2632cadf10.jpg?auto=compress,format&q=80&fit=max&width=700&height=1280&dpr=1)

**_PLEASE NOTE: It is VERY important that you get a flush/flat alignment on the bottom during glue up. If the bottom is not flush, it will not stand well._**

**_PLEASE NOTE: It is VERY important that you get a flush/flat alignment on the bottom during glue up. If the bottom is not flush, it will not stand well._**

If cutting the piggy bank with a base material thickness and kerf parameters and cut this kerf tester piece before cutting the above design.

Makes & Comments

You must be a member of Cuttle Pro to post in this area.

LICENSE

To make or sell physical items [upgrade to Cuttle Pro](https://cuttle.xyz/pricing).

PRO

Upgrade to Cuttle Pro to create physical items for personal use.

PRO

Upgrade to Cuttle Pro to sell physical items derived from this template.

You may not sell or give away digital items (like SVGs) derived from this template. [Learn more](https://cuttle.xyz/learn/licensing).