Have an SVG designed for one material thickness, but want to use another? This template scales your artwork to match the material you plan to cut.
Upload your source SVG, enter the original material thickness and your new material thickness, then export the converted SVG.
Before you begin
You will need your original SVG, the material thickness it was designed for, and the thickness you want to use.
Measure your material rather than relying only on its labeled thickness. For a better starting point, use the Slot Size Tester to find a slot width that gives you the fit you want. Enter that tested width as your New Material value to account for fit without calculating kerf separately.
How to use it
Upload your artwork using Source Svg.
Set Source Material to the material thickness the original design was made for.
Set New Material to your new material thickness, or the slot width you selected using the Slot Size Tester.
Download the converted SVG and open it in your laser software.
How scaling works
The scale factor is the new material value divided by the source material value.
For example, converting a design from 3 mm to 4 mm makes the artwork approximately 133.3% of its original size. A part that was 90 mm wide becomes 120 mm wide, and a 3 mm slot becomes 4 mm wide.
Thicker material makes the project larger. Thinner material makes it smaller.
Important limitations
This template changes the size of the entire design. It does not resize only the slots or preserve the original finished dimensions. There is no separate finished size control.
Holes, tabs, decorative details, and engraving geometry scale along with the rest of the artwork. Check any features that must fit fixed size hardware, magnets, or other purchased parts.
The converter does not identify joints or repair an incorrect source file. Your original artwork should already be correctly sized for its stated source material thickness.
To make or sell physical items upgrade to Cuttle Pro.

